MagnaClean AtomSC™ | Compact Compliance

Our latest addition to the ADEY MagnaClean® range of system filters, the MagnaClean AtomSC is a super-compact magnetic filter, delivering complete installation flexibility with our smallest cut-out yet of 60mm, ideal for all situations.

The MagnaClean AtomSC is sold as complete compliance packs for ease of specification and compliance with Building Regulations Part L and BS 7593.

MagnaClean AtomSC™ Compliance Pack

Our latest addition to the ADEY MagnaClean® range of system filters, the MagnaClean AtomSC ™ is a super-compact magnetic filter, delivering complete installation flexibility with our smallest cut-out yet of 60mm, ideal for all situations.

The MagnaClean AtomSC is sold as a complete compliance pack for ease of specification and compliance with Building Regulations Part L.

Image of technical specification brochure page

Contractor benefits

Super-compact: Designed to facilitate installation directly under a boiler or the immediate proximity.
Ultra-small footprint: 60mm cut-out, ideal for rear fed pipe jigs or for meeting minimum clearance requirements under boilers.
Complete magnetite removal: A fully removable filter canister also ensures the complete removal of captured magnetite without the likelihood of magnetite re-entering the system.
Easy isolation: A single point isolation valve allows for easy isolation between filter and boiler.
Quick and easy servicing: Built-in vent and drain points enable easy servicing and maintenance. Flushing adaptor also available (sold separately).
Compact Compliance: Sold as a complete compliance pack supplied with ADEY MC3+® System Cleaner, ADEY MC1+® System Protector and an ADEY ProCheck® Water Test Kit, giving you complete peace of mind with adherence to BS 7593.
Access to ADEY ProCheck® water test results via ADEY Sense® portal.
Compliance packs with additional system protection are also available. These include either Electroscale2® or Magnascale2®.
10-year warranty.

Technical specifications

Material

Bleed Screw

MagnaClean AtomSC™
Compliance Pack

Three pack types available containing:
Compact MagnaClean AtomSC ™ filter
MC1+® Inhibitor
MC3+® Cleaner
ADEY ProCheck® Test strips x 2 and card
With additional option of Electroscale2® OR Magnascale2®

Body material: Brass
Screw: Brass
Thread interface: M6

Canister & threaded ring material: Glass reinforced polymer
Finish/colour: Black

Drain & Vent Port

Body material: Brass
Drain plug thread: M8 (non standard)
Seals: EPDM

Size/dimensions (product installation)

Height: 60mm (including valves, 114mm)
Width (Including valves): 80mm
Depth from pipe centre: 120mm

MagnaClean AtomSC™

Internal water operating temp: 3°C to 95°C
Internal operating water pressure: up to 4.5 bar
Maximum flow rate: 50 L/min
Canister & threaded ring material: Glass reinforced polymer
Fluid capacity: 130ml
Inlet: 22mm compression
Outlet: 22mm compression
Thread: Pressure thread
Flow configuration: Uni-directional
Valve to canister seal: EPDM
Magnet length: 62 mm
Magnet diameter: 16 mm

Servicing Clearance

Air vent and drain plug: 30mm
Canister removal: 30mm

MC1+® Protector 500ml MC3+® Cleaner 500ml ADEY ProCheck® Electroscale2® Magnascale2®

Packaging and Handling

Packaged in single units with all components included

Storage

No special storage requirements necessary

Installation and servicing guide

Maintain peak performance

MagnaClean AtomSC™, should be fitted in-line on the return pipe, underneath or as near to the the boiler as possible. Alternative sitings can be located when the return pipe is not available.

ADEY always recommends that a magnetic filter be installed on both new and existing systems to extend the operational life of the boiler as well as reduce maintenance call-outs and heating bills.

ADEY Best Practice™ essentials:
MC1 +™ Central Heating System PROTECTOR
MC3+™ Central Heating System CLEANER.

Always follow the electrical and safety standards when installing a filter.
It is recommended that the filter is installed by a qualified heating engineer.
Care should be taken when handling. During transportation, secure the unit properly to prevent any damage. If this product is not being installed immediately, ensure it is stored in a dry, frost-free location in its original packaging.
These product assemblies contain valuable materials which can be recovered or recycled. At the end of the product’s useful life, please leave it at an appropriate local civic waste collection point.

Installation & Servicing Guide

Download

Homeowner benefits

Reassurance and proof of compliance with Building Regulations Part L and BS 7593.
Up to 7% annual saving on heating bills.
Immediate ongoing system protection.
Extended system life.
Reduced carbon emissions.
10-year warranty when registered within 30 days of installation.

Graphic describing ADEY's recommended Best Practice

Find your local representative

Featured Products

ADEYProCheckUniversalWaterTestKit Lifestyle

The UK’s first and most advanced central heating digital water test kit, providing instant lab-style results and recommendations using a smartphone in under 2 minutes.

The harder the water, the more minerals it contains and the more likely limescale will be a problem. ElectroScale2 provides whole house protection from limescale.

Clean and protect heating systems from corrosion by dosing the water with MC1+ Inhibitor and MC3+ Cleaner at every visit. 500ml treats up to 125L or 15 radiators.

Some handy tools to help you protect your central heating system