MC3+® Cleaner

MC3+ Cleaner has been developed specifically to keep heating systems free from debris.

Once added, its powerful formulation gets to work on breaking down magnetite and other sludge in as little as an hour.

MC3+ can be left in the system for a maximum of 28 days.

Installer benefits

High-performance chemical cleaner
Highly concentrated formula
Suitable for all heating systems
Gets to work in an hour
Can be left in the system for up to a maximum of 28 days
Part L Building Regulation compliant and compatible with BS 7593
Can be dosed through the MagnaClean® filter
Available in the following sizes: 300ml, 500ml, 5L, 10L, 25L, 200L & 1000L
Can be used with any of ADEY's water testing products

Technical specifications

Physical and chemical properties

Environmental credentials

Appearance: Liquid
Colour: Brown
Odour: Slight
Solubility: Soluble in water
pH (concentrated solution): 6.0 - 7.0
Relative Density: 1.08 - 1.10 g/cm³

Non-hazardous
Non-toxic
Biodegradable

Quality

ISO 9001 & ISO 14001

Dosage instructions

How to use

500ml of MC3+ treats 125 litres or 15 single panel radiators. Introduce MC3+ to the system via the filling loop or radiator using a suitable injector, or via a MagnaClean® filter. For open vented systems MC3+ can be added via the F&E tank, remembering to remove sufficient water via the drain-point to ensure MC3+ enters the system circuit. By increasing the system water temperature, performance of MC3+ is enhanced. MC3+ can be left in the system for a maximum of 28 days.

Clean system as recommended in BS7593 using ADEY MagnaCleanse® and MC3+.

For heavily sludged systems, ADEY MC5 RapidFlush System Cleaner is recommended. Cleanse, drain and flush thoroughly until the water runs clear. Refill the system and add the correct dosage of MC1+ for the optimum protection against the build-up of corrosion and limescale.

Also available in the following sizes: 300ml, 5L, 10L, 25L, 200L and 1,000L.
Do not use in single feed indirect cylinders.

Technical
Data Sheet

Download

Safety
Data Sheet

Download

Homeowner benefits

Removes magnetite, debris and scale
Restores heating efficiency
Helps reduce heating and maintenance bills

Enter your postcode to find your nearest merchant.

Get straight to the products you need in a few clicks.

Find a Stockist

Also available in Rapide

MC3+ is available in a 500ml and a 300ml bottle.
MC3+ Rapide gets to work on breaking down debris fast. Its powerful formula is designed specifically to clear all debris. And with a quick-dose bottle, it can be added in 20 seconds and cleaning up magnetite and other sludge in an hour.

View product

MC3+® Cleaner

Installer Benefits

High performance chemical cleaner
Highly concentrated formula
Suitable for all heating systems
Gets to work in an hour
Can be left in the system for up to a maximum of 28 days
Part L Building Regulation compliant and compatible with BS7593
Can be dosed through the MagnaClean® filter
Available in the following sizes: 300ml, 500ml, 5L, 10L, 25L, 200L & 1000L
Can be used with any of ADEY's water testing products

Sample text. Click to select the text box. Click again or double click to start editing the text.

Sample text. Click to select the text box. Click again or double click to start editing the text. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.

Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.

Technical Specifications

Physical and chemical properties

Environmental credentials

Appearance: Liquid
Colour: Brown
Odour: Slight
Solubility: Soluble in water
pH (concentrated solution): 6.0 - 7.0
Relative Density: 1.08 - 1.10 g/cm³

Non-hazardous
Non-toxic
Biodegradable

Quality

ISO 9001 & ISO 14001

Dosage Instructions

How to use

500ml of MC3+ treats 125 litres or 15 single panel radiators. Introduce MC3+ to the system via the filling loop or radiator using a suitable injector, or via a MagnaClean® filter. For open vented systems MC3+ can be added via the F&E tank, remembering to remove sufficient water via the drain-point to ensure MC3+ enters the system circuit. By increasing the system water temperature, performance of MC3+ is enhanced. MC3+ can be left in the system for a maximum of 28 days.

Clean system as recommended in BS7593 using ADEY MagnaCleanse® and MC3+. For heavily sludged systems, ADEY MC5 RapidFlush System Cleaner is recommended. Cleanse, drain and flush thoroughly until the water runs clear. Refill the system and add the correct dosage of MC1+ for the optimum protection against the build-up of corrosion and limescale.

Also available in the following sizes: 300ml, 5L, 10L, 25L, 200L and 1,000L.
Do not use in single feed indirect cylinders.

Sample text. Click to select the text box. Click again or double click to start editing the text.

Safety
Data Sheet

Download

Technical
Data Sheet

Download