MagnaClean™ Atom2
with Flexi Hose 

MagnaClean Atom2™ with flexi hose, the super flexible compact filter. 
MagnaClean Atom2's super compact, in-line design provides multiple installation options enabling greater flexibility, with or without the flexi hose.

Contact ADEY Customer Services for more information.

Contractor benefits




  • Bi-directional - either port can be an inlet
  • Can be installed even in the tightest of spaces• Can be installed with or without the flexi hose, enabling ultimate flexibility in installation
  • Quick and simple installation
  • Easy access to air vent and drain valve for simple servicing
  • Quick and easy chemical dosing using ADEY® Rapide®






Image of technical specification brochure page

Technical specifications

Canister and Lid

  • Canister and threaded ring material : Glass reinforced polymer
  • Fluid capacity : 290 ml
  • Inlet diameter : ¾" BSP 
  • Outlet diameter : ¾"BSP
  • Canister thread : Pressure thread
  • Flow configuration : Bi-directional
  • Valve to canister seal : EPDM

Hose

MagnaClean™ Atom2

  • Material: Stainless Steel
  • Retracted Length (straight): 79mm
  • Connections: F 3/4" BSPP x M 3/4" BSPP
  • Internal water operating temperature : 3°C to 95°C
  • Internal operating water pressure : Up to 4.5 bar
  • Maximum flow rate : 50L / min 

Servicing Clearance

  • Air vent : 20mm
  • Drain plug: 30mm

Packaging and Handling

Magnet

  • Length : 82.5 mm
  • Diamètre : 20 mm
  • Packaged in single units with all components included

Drain & Port

Storage

MC1+® Protector 500ml MC3+® Cleaner 500ml ADEY ProCheck® Electroscale2® Magnascale2®
  • Drain plug material : Brass
  • Drain plug thread : M8 (non standard)
  • Seals: EPDM
  • No special storage requirements necessary

Bleed Screw

  • Body material: ​​​Brass
  • Screw: Brass
  • Thread interface: M6

Installation and servicing guide

Maintain peak performance

Whether you’re fitting a MagnaClean™ Atom2 on a brand-new boiler or retrofitting it on an existing boiler, get the installation right to give the boiler the best protection. And to help keep the filter performing as powerfully as the day it was fitted, service it properly. To do both, simply follow our guide.

  • Always follow the electrical and safety standards when installing a filter.
  • It is recommended that the filter is installed by a qualified heating engineer.
  • Care should be taken when handling. During transportation, secure the unit properly to prevent any damage. If this product is not being installed immediately, ensure it is stored in a dry, frost-free location in its original packaging.
  • These product assemblies contain valuable materials which can be recovered or recycled. At the end of the product’s useful life, please leave it at an appropriate local civic waste collection point.

Installation & Servicing Guide

Download

Fit a filter every time 
MagnaClean Atom2 should be fitted on the return pipe. Alternative sitings can be located when the return pipe is not available. 
ADEY always recommends that a magnetic filter be installed on both new and existing systems to extend the operational life of the boiler as well as reduce maintenance call-outs and heating bills.


Homeowner benefits

  • 7% annual saving on heating bills*
  • Immediate ongoing system protection
  • Extended system life of up to 7 years
  • Reduces CO2 emissions by up to 250kg per year 
  • 10 year warranty 

    *For a typical three bedroom property based on independant reserach.
Graphic describing ADEY's recommended Best Practice

Enter your postcode to find your nearest merchant.

Find a Stockist

MagnaClean™ Atom2
with Flexi Hose 

MagnaClean Atom2™ with flexi hose, the super flexible compact filter. 
MagnaClean Atom2's super compact, in-line design provides multiple installation options enabling greater flexibility, with or without the flexi hose.

Installer Benefits

  • Bi-directional - either port can be an inlet
  • Can be installed even in the tightest of spaces• Can be installed with or without the flexi hose, enabling ultimate flexibility in installation
  • Quick and simple installation
  • Easy access to air vent and drain valve for simple servicing
  • Quick and easy chemical dosing using ADEY® Rapide®

Technical Specifications

Canister and Lid

  • Canister and threaded ring material : Glass reinforced polymer
  • Fluid capacity : 290 ml
  • Inlet diameter : ¾" BSP
  • Outlet diameter : ¾"BSP 
  • Canister thread : Pressure thread
  • Flow configuration : Bi-directional
  • Valve to canister seal : EPDM

Magnet

  • Length : 82.5 mm 
  • Diamètre : 20 mm

Drain & Port

  • Drain plug material : Brass
  • Drain plug thread : M8 (non standard)
  • Seals: EPDM

Bleed Screw

  • Body material : Brass
  • Screw : Brass
  • Thread interface : M6

Hose

  • Material: Stainless Steel
  • Retracted Length (straight): 79mm
  • Connections: F 3/4" BSPP x M 3/4" BSPP

Servicing Clearance

  • Air vent : 20mm
  • Drain plug : 30mm

Packaging and handling

  • Packaged in single units with all components included

Storage

  • No special storage requirements necessary

MagnaClean™ Atom2

  • Internal water operating temperature : 3°C to 95°C
  • Internal operating water pressure : Up to 4.5 bar
  • Maximum flow rate : 50L / min
MC1+® Protector 500ml MC3+® Cleaner 500ml ADEY ProCheck® Electroscale2® Magnascale2®

Installation & Servicing

Maintain peak performance

Whether you’re fitting a MagnaClean™ Atom2 on a brand-new boiler or retrofitting it on an existing boiler, get the installation right to give the boiler the best protection. And to help keep the filter performing as powerfully as the day it was fitted, service it properly. To do both, simply follow our guide.

Fit a filter every time 
MagnaClean Atom2 should be fitted on the return pipe. Alternative sitings can be located when the return pipe is not available. ADEY always recommends that a magnetic filter be installed on both new and existing systems to extend the operational life of the boiler as well as reduce maintenance call-outs and heating bills.

Installation & Servicing Guide

Download

Homeowner Benefits

  • Reassurance and proof of compliance with Building Regulations Part L
  • 7% annual saving on heating bills
  • Immediate ongoing system protection
  • Extended system life
  • Reduced carbon emissions
  • 10-year warranty when registered within 30 days of installation

Enter your postcode to find your nearest merchant.

Find a Stockist