MagnaClean HP+ HydroMesh™ 

Low temperature heating systems, like those with heat pumps, are the perfect breeding ground for bacterial growth, which can clog them up, reducing efficiencies and ultimately causing breakdown. 

MagnaClean HP+ Hydromesh™ has been designed specifically to protect heat pumps from both magnetic and non-magnetic debris, keeping them working as efficiently as possible, for as long as possible. 

Thanks to its ​high quality build, powerful magnet, brilliant mesh technology, stainless steel gauze, you can rest assured that you are fitting a filter that will efficiently protect heat pumps and will stand the test of time.  

Installer Benefits

  • Specially designed to protect heat pump systems.
  • Dedicated magnetic and non-magnetic capture allows both types of debris to be captured before it enters the heat pump.
  • ADEY Cycloflow™ technology ensures even distribution of debris around the mesh, preventing magnetite build up in areas and ensuring continuous flow rates.
  • Large canister ports.
  • Valves enable high flow rates and minimise pressure drops.
  • First pass and continuous flow capture.
  • Quick & easy to install & service.
  • Chemicals can be easily dosed directly into the canister.
  • 10-year warranty.

Homeowner benefits

  • Protects heat pumps from magnetic and non-magnetic debris.
  • Immediate ongoing system protection.
  • 10-year warranty when registered within 30 days of installation.




Technical Specifications

Specifications

  • Internal water operating temperature: 3°C to 95°C
  • Maximum working pressure: 6 bar
  • Maximum flow rate: 80 L/min

Canister and Lid

  • M​aterial: ​Glass reinforced nylon  
  • Fluid capacity: 930ml
  • Thread: Pressure thread
  • Flow configuration: ​ Bi-directional
  • Main lid seal: EPDM
  • Valve to canister: EPDM

Magnet

  • Housing: ​Stainless steel
  • Length: 150 mm
  • Diameter: 19 mm 

Bleed Valve

  • Body material: ​Nickel-plated brass 
  • Screw: Nickel-plated brass
  • Thread interface: M6 
  • Seals: EPDM

Drain port

  • Drain plug material: ​Nickel-plated brass
  • Drain plug thread: M8 
  • Seals: EPDM

Valves

  • Body material: ​ Nickel plated brass
  • Seal material: ​ Long life PTFE ball seals
  • O ring material: EPDM 
  • Valve inlet/outlet: ​ 1 4" BSPP Female

Servicing Clearance

  • Air vent (top): 50 mm
  • Drain Plug (bottom): 50 mm

Packaging and handling

  • Packaged in single units with all components included

Storage

  • Height: 250.5mm
  • Width at lid: 115mm 

Polymer Mesh

  • Mesh: 300 micron
  • Length: ​87mm
  • Diameter: ​72mm

Installation and servicing guide

Maintain peak performance

Whether you’re fitting a MagnaClean HP+ HydroMesh™ on a brand-new heat pump installation or retrofitting it on an existing one, get the installation right to give the heat pump the best protection possible. To help keep the filter performing at peak efficiency, just like it was the day it was fitted, service it on an annual basis. The replacement of perishable parts (lid seal, o-ring and mesh) are required on inspection at annual servicing. Download our guides for detailed information.

  • Always follow the electrical and safety standards when installing a filter.
  • It is recommended that the filter is installed by a qualified heating engineer.
  • MagnaClean HP+ HydroMesh™ must be installed indoors and is not suitable for external use.
  • MagnaClean HP+ HydroMesh™ should ideally be fitted in-line on the return pipe. Alternative sittings can be located when the return pipe is not available.


Ensure the system has been thoroughly flushed, and the water quality is tested at commission to confirm that the correct Inhibitor and Biocide levels are present for the size of system installed.

Poor water quality will mean the filter may be required to be cleaned regularly to maintain circulation flow rates and support the high efficiency of the Heat Pump unit.

The rotational valves on the MagnaClean HP+ HydroMesh™ filter provide multiple installation options. The design principle also allows filter to be orientated horizontally on the pipe work. The canister should be fitted below the pipeline in this scenario.




Installation & Servicing Guide

Download

MagnaClean HP+ HydroMesh™ 

Low temperature heating systems, like those with heat pumps, are the perfect breeding ground for bacterial growth, which can clog them up, reducing efficiencies and ultimately causing breakdown. 

MagnaClean HP+ Hydromesh™ has been designed specifically to protect heat pumps from both magnetic and non-magnetic debris, keeping them working as efficiently as possible, for as long as possible. 

Thanks to its ​high quality build, powerful magnet, brilliant mesh technology, stainless steel gauze, you can rest assured that you are fitting a filter that will efficiently protect heat pumps and will stand the test of time.  

Installer Benefits

  • Specially designed to protect heat pump systems.
  • Dedicated magnetic and non-magnetic capture allows both types of debris to be captured before it enters the heat pump.
  • ADEY Cycloflow™ technology ensures even distribution of debris around the mesh, preventing magnetite build up in areas and ensuring continuous flow rates.
  • Large canister ports.
  • Valves enable high flow rates and minimise pressure drops.
  • First pass and continuous flow capture.
  • Quick & easy to install & service.
  • Chemicals can be easily dosed directly into the canister.
  • 10-year warranty.
View our MagnaClean Quick Guide

Homeowner Benefits

  • Protects heat pumps from magnetic and non-magnetic debris.
  • Immediate ongoing system protection.
  • 10-year warranty when registered within 30 days of installation.

Technical Specifications

Specifications
Internal water operating temperature: 3°C to 95°C
Maximum working pressure: 6 bar
Maximum flow rate: 80 L/min

Canister and Lid
M​aterial: ​Glass reinforced nylon
Fluid capacity: 930ml 
Thread: Pressure thread 
Flow configuration: ​ Bi-directional 
Main lid seal: EPDM 
Valve to canister: EPDM

Magnet
Housing: ​Stainless steel 
Length: 150mm 
Diameter: 19mm

Bleed Valve
Body material: ​Nickel-plated brass 
Screw: Nickel-plated brass 
Thread interface: M6 
Seals: EPDM

Drain port
Drain plug material: ​Nickel-plated brass
Drain plug thread: M8 
Seals: EPDM

Valves
Body material: ​ Nickel plated brass
Seal material: ​ Long life PTFE ball seals
O ring material: EPDM
Valve inlet/outlet: ​ 1 4" BSPP Female

Servicing Clearance
Air vent (top): 50 mm
Drain Plug (bottom): 50 mm

Packaging and handling
Packaged in single units with all components included

Storage
Height: 250.5mm
Width at lid: 115mm

Polymer Mesh
Mesh: 300 micron 
Length: ​87mm
Diameter: ​72mm

Installation & Servicing

Maintain peak performance

Whether you’re fitting a MagnaClean HP+ HydroMesh™ on a brand-new heat pump installation or retrofitting it on an existing one, get the installation right to give the heat pump the best protection possible. To help keep the filter performing at peak efficiency, just like it was the day it was fitted, service it on an annual basis. The replacement of perishable parts (lid seal, o-ring and mesh) are required on inspection at annual servicing. Download our guides for detailed information.

  • Always follow the electrical and safety standards when installing a filter.
  • It is recommended that the filter is installed by a qualified heating engineer.
  • MagnaClean HP+ HydroMesh™ must be installed indoors and is not suitable for external use.
  • MagnaClean HP+ HydroMesh™ should ideally be fitted in-line on the return pipe. Alternative sitings can be located when the return pipe is not available.

Ensure the system has been thoroughly flushed, and the water quality is tested at commission to confirm that the correct Inhibitor and Biocide levels are present for the size of system installed.

Poor water quality will mean the filter may be required to be cleaned regularly to maintain circulation flow rates and support the high efficiency of the Heat Pump unit.

The rotational valves on the MagnaClean HP+ HydroMesh™ filter provide multiple installation options. The design principle also allows filter to be orientated horizontally on the pipe work. The canister should be fitted below the pipeline in this scenario.

Installation & Servicing Guide

Download

Learn more about MagnaClean HP™ 

RELATED PRODUCT

Prevent biological build-up with MC10+ Biocide

With a dual biocide formulation, MC10+ tackles algae and biological contamination with ease. Extra concentrated, containing two active ingredients, it’s more effective than single biocide products when it comes to preventing the problems that arise in underfloor heating. 

View product

THE LATEST

Heat Pumps: The Future of Heating in the UK?

As the UK government aims to reach its target of net-zero emissions by 2050, renewable energy sources are becoming more important than ever and will soon become the norm within the heating industry. But what does this mean for you? 

Read our article to find out ​  

Help & Support

Click to view our Customer Support, Savings Calculator and FAQs

Tool

Product
Selector

Get straight to the products you need in a few clicks.

Tool

Find a 
Rep

Discover who your local Business Support Manager is.

Tool

Find a
Stockist

Enter your postcode to find your nearest merchant .

Helpful Tools

ADEY’s got some handy tools to help you protect your central heating system…

Product
Selector

Get straight to the products you need in a few clicks.

Find a
Rep

Discover who your local Business Support Manager is.

Need
Spares?

You can buy spares parts direct from us on our ADEY Spares site.