Analysis of system water
Conducting a simple analysis of system water will identify the critical parameters affecting the longevity and efficiency of the system.
The corrosion test strips will identify
whether corrosion has built up, or is
building in the system.
The pH test strips will assess the
acidity/alkalinity levels of the water. System pH should be between 6.5-8.5, anything outside of this can cause different types of corrosion.
The inhibitor test strips will identify
inhibitor levels in a system. All systems should have a polymer based inhibitor in, and should be topped up on a regular basis.
All 3 tests will provide recommendations
on how to restore/treat the system
water
Commercial water testing
The first step to diagnosing the root cause of any system issue, or preventing damage/failures from occurring in new systems is to test the quality of the water.
ADEY's 3 different on-site water test strips - corrosion, pH and inhibitor, provide simple way to diagnose those root causes.
Analysis of system water
Conducting a simple analysis of system water will identify the critical parameters affecting the longevity and efficiency of the system.
The corrosion test strips will identify
whether corrosion has built up, or is
building in the system.
The pH test strips will assess the
acidity/alkalinity levels of the water. System pH should be between 6.5-8.5, anything outside of this can cause different types of corrosion.
The inhibitor test strips will identify
inhibitor levels in a system. All systems should have a polymer based inhibitor in, and should be topped up on a regular basis.
All 3 tests will provide recommendations
on how to restore/treat the system
water.
Simple process from sample to result
Each strip pot comes with a 5-step simple instruction guide, and a color
chart that identifies the correct/incorrect levels for you.
Download the technical data sheets below.