Installer benefits

  • Designed for larger heating systems and 28mm pipework
  • Greater filter capacity
  • Captures magnetic and non-magnetic debris
  • Ultra-thin sheath enhances magnetite capture
  • In-line installation can be completed in just two minutes
  • 360° rotational valves providing multiple installation options
  • The full flow valves can be fitted in any orientation to accommodate different pipework runs, as long as the filter is upright
  • Bi-directional flow means either port can be an inlet, increasing flexibility
  • Removable sheath makes servicing quick and easy
  • Chemicals can be easily dosed directly into the canister
  • Low-profile drain valve designed for easier servicing 
  • Rapid-fit connectors for faster servicing
View our MagnaClean Quick Guide

Technical specifications

Canister and Lid

  • M​aterial: ​Glass reinforced nylon
  • Fluid capacity: 840 ml
  • Inlet diameter: 28 mm at valve
  • Outlet diameter: 28 mm at valve
  • Thread: Pressure thread
  • Flow configuration: Bi-directional
  • Main lid seal: EPDM 
  • Valve to canister: EPDM

Drain Port

  • Drain plug material: ​Nickel-plated brass
  • Drain plug thread: M8 
  • Seals: EPDM

Material

  • Weight: 2.85kg
  • Finish/colour: Black

Magnet

  • Housing: ​Stainless steel
  • Length: 225 mm 
  • Diameter: 19 mm

Seal Valves

  • Body material: ​Nickel-plated brass
  • Seals material: Long life PTFE ball seals
  • O ring material: EPDM 70 seals  
  • Valve inlet/outlet: 28 mm

Packaging

  • Packaging: Card
  • Pack size: 4 filters per outer
  • Unit of measure: mm/kg

Bleed Valve

  • Body material: ​Nickel-plated brass
  • Screw: Nickel-plated brass
  • Thread interface: M6 
  • Seals: EPDM

Servicing Clearance

  • A​ir vent (top): 50 mm 
  • Drain Plug (bottom): 50 mm

Size/dimensions (product installation)

  • Height: 278.5mm
  • Width at lid: 97.7mm
  • Distance between filter centre & valve centre: 110.8mm

Installation and servicing guide

Maintain peak performance

Whether you’re fitting a MagnaClean® Professional 2XP on a brand-new system or retrofitting it on an existing system, get the installation right to give the boiler or heat pump the best protection. And to help keep the filter performing as powerfully as the day it was fitted, service it properly. To do both, simply follow our guide.

  • Always follow the electrical and safety standards when installing a filter.
  • It is recommended that the filter is installed by a qualified heating engineer.
  • Care should be taken when handling. During transportation, secure the unit properly to prevent any damage. If this product is not being installed immediately, ensure it is stored in a dry, frost-free location in its original packaging.
  • These product assemblies contain valuable materials which can be recovered or recycled. At the end of the product’s useful life, please leave it at an appropriate local civic waste collection point.
  • Use tool (provided in pack) to tighten lid.

Installation & Servicing Guide

Download

Homeowner benefits

  • 7%* annual saving on heating bills (*For a typical three-bedroom property based on independent research)
  • Immediate ongoing protection for boilers and renewable heating systems
  • Extends the life of the central heating system
  • Reduced carbon emissions 
  • 10-year warranty when registered within 30 days of installation
View our MagnaClean Quick Guide

Enter your postcode to find your nearest merchant.

Get straight to the products you need in a few clicks.

Find a Stockist

RELATED PRODUCT

Protect larger heating systems with MagnaClean DualXP®

To protect central heating systems that are bigger than the average household, there’s our MagnaClean DualXP®. With not one but two powerful magnetic capture zones, eradicating the extra magnetite and debris larger systems create is what this filter’s built to do.

View product

MagnaClean Professional2XP®

The more radiators there are, the bigger the potential for magnetite. MagnaClean Professional2XP is the answer. With extra filter capacity, it’s been designed specifically to handle the volume of larger systems.

How to Videos

Helpful Tools

ADEY’s got some handy tools to help you protect your central heating system…

Product
Selector

Get straight to the products you need in a few clicks.

Find a
Rep

Discover who your local Business Support Manager is.

Need
Spares?

You can buy spares parts direct from us on our ADEY Spares site.

Help & Support

Click to view our Customer Support, Savings Calculator and FAQs

Tool

Product
Selector

Get straight to the products you need in a few clicks.

Tool

Find a 
Rep

Discover who your local Business Support Manager is.

Tool

Find a
Stockist

Enter your postcode to find your nearest merchant .