I’m a Homeowner
I’m an Installer

MagnaClean HP™ - Effective Heat Pump Protection

Low temperature heating systems, like those with heat pumps, are the perfect breeding ground for bacterial growth, which can clog them up, reducing efficiencies and ultimately causing breakdown. 

MagnaClean HP has been designed specifically to protect heat pumps from both magnetic and non-magnetic debris, keeping them working as efficiently as possible, for as long as possible. 

Thanks to its high-quality build, powerful magnet, stainless steel gauze and non-blocking design, you can rest assured that you are fitting a filter that will efficiently protect heat pumps and will stand the test of time.  

Installer Benefits

  • Specially designed to protect heat pump systems.
  • Dedicated magnetic and non-magnetic capture allows both types of debris to be captured before it enters the heat pump.
  • Incorporates unique ADEY CycloFlow™ Technology which enhances water. flow rate whilst simultaneously maximising first-pass capture rate.
  • Non-blocking design for optimum flow, even when the filter is full, keeping the system working as efficiently as possible.
  • Large canister ports: available for 28mm systems.
  • Valves enable high flow rates and minimise pressure drops.
  • First pass and continuous flow capture.
  • Quick & easy to install & service.
  • Chemicals can be easily dosed directly into the canister.
  • 10-year warranty.

Homeowner benefits

  • Protects heat pumps from magnetic and non-magnetic debris.
  • Save up to 7% on your gas usage with ADEY Best Practice®*.
  • Immediate ongoing system protection.
  • Extended system life of up to 7 years*.
  • Reduces CO2 emissions by up to 250kg per year*.
  • 10-year warranty when registered within 30 days of installation.

*Based on independent research in the UK.

Find out more

Technical Specifications

Canister and Lid

  • M​aterial: ​Glass reinforced nylon
  • Fluid capacity: 930ml
  • Inlet diameter: 1" at valve
  • Outlet diameter: 1" at valve
  • Thread: Pressure thread
  • Flow configuration: ​Directional inlet on bottom port
  • Main lid seal: EPDM 
    Valve to canister: EPDM

Magnet

  • Housing: ​Stainless steel
  • Length: 150 mm
  • Diameter: 19 mm 

Valves

  • Body material: ​Nickel-plated brass
  • Seal material: long-life PTFE ball seals
  • O ring material: EPDM
  • Valve inlet/outlet: 22mm

Specifications

  • Internal water operating temperature: 3°C to 95°C
  • Maximum working pressure: 6 bar
  • Maximum flow rate: 80 L/min (5m3/h)

Drain port

  • Drain plug material: ​Nickel-plated brass
  • Drain plug thread: M8 
  • Seals: EPDM

Bleed Valve

  • Body material: ​Nickel-plated brass
  • Screw: Nickel-plated brass 
  • Thread interface: M6 
  • Seals: EPDM

Servicing Clearance

  • Air vent (top): 50 mm
  • Drain Plug (bottom): 50 mm

Size/dimensions (product installation)

  • Height: 250.5mm
  • Width at lid: 115mm

Installation and servicing guide

Maintain peak performance

Whether you’re fitting a MagnaClean HP™ on a brand-new heat pump installation or retrofitting it on an existing one, get the installation right to give the heat pump the best protection possible. To help keep the filter performing at peak efficiency, just like it was the day it was fitted, service it on an annual basis. Download our guides for detailed information.

  • Always follow the electrical and safety standards when installing a filter.
  • It is recommended that the filter is installed by a qualified heating engineer.
  • MagnaClean HP must be installed indoors and is not suitable for external use.
  • MagnaClean HP should ideally be fitted in-line on the return pipe. Alternative sitings can be located when the return pipe is not available.

Installation & Servicing Guide

Download

Enter your postcode to find your nearest merchant.

Get straight to the products you need in a few clicks.

Find a Stockist

RELATED PRODUCT

Prevent biological build-up with MC10+ Biocide

With a dual biocide formulation, MC10+ tackles algae and biological contamination with ease. Extra concentrated, containing two active ingredients, it’s more effective than single biocide products when it comes to preventing the problems that arise in underfloor heating. 

View product

MagnaClean HP™ - Effective Heat Pump Protection

Low temperature heating systems, like those with heat pumps, are the perfect breeding ground for bacterial growth, which can clog them up, reducing efficiencies and ultimately causing breakdown. 

MagnaClean HP has been designed specifically to protect heat pumps from both magnetic and non-magnetic debris, keeping them working as efficiently as possible, for as long as possible. 

Thanks to its high-quality build, powerful magnet, stainless steel gauze and non-blocking design, you can rest assured that you are fitting a filter that will efficiently protect heat pumps and will stand the test of time.  

Installer Benefits

  • Specially designed to protect heat pump systems.
  • Dedicated magnetic and non-magnetic capture allowing capture of both magnetic and non-magnetic debris before it enters the heat pump.
  • Incorporates unique ADEY CycloFlow™ Technology which enhances water flow rate whilst simultaneously maximising first-pass capture rate.
  • Non-blocking design for optimum flow, even when the filter is full, keeping the system working as efficiently as possible.
  • Large canister ports: available for 28mm systems.
  • Valves enable high flow rates and minimise pressure drops.
  • First pass and continuous flow capture.
  • Quick & easy to install & service.
  • Chemicals can be easily dosed directly into the canister.
  • 10-year warranty.
View our MagnaClean Quick Guide

Homeowner Benefits

  • Protects heating systems from magnetic and non-magnetic debris
  • Save up to 7% on your gas usage*
  • Immediate ongoing system protection with dedicated magnetic and non-magnetic capture
  • Extended system life of up to 7 years 
  • Reduces CO2 emissions by up to 250kg per year
  • 10-year warranty when registered within 30 days of installation

*Based on independent research in the UK.

Find out more

Technical Specifications

Technical Specifications
Internal water operating temperature: 3°C to 95°C 
Maximum working pressure: 6 bar 
Maximum flow rate: 80 L/min (5m3/h)

Canister and Lid
Material: Glass reinforced nylon
Fluid capacity: 930ml
Inlet diameter: 1" at valve
Outlet diameter: 1" at valve
Thread: Pressure thread
Flow configuration: ​Directional inlet on bottom port 
Main lid seal: EPDM
Valve to canister: EPDM

Magnet
Housing: ​Stainless steel 
Length: 150mm 
Diameter: 19mm

Seal Valves
Body material: ​Nickel-plated brass Seal material: Long-life PTFE ball seals 
O ring material: EPDM 
Valve inlet/outlet: 1" BSPP and 28mm compression

Bleed Valve
Body material: ​Nickel-plated brass 
Screw: Nickel-plated brass
Thread interface: M6 
Seals: EPDM

Drain Port
Drain plug material: ​Nickel-plated brass 
Drain plug thread: M8 
Seals: EPDM

Servicing Clearance
Air vent (top): 50 mm
Drain Plug (bottom): 50 mm

Size dimensions
Height: 250.5mm
Width at lid: 115mm

Installation & Servicing

Maintain peak performance

Whether you’re fitting a MagnaClean HP™ on a brand-new heat pump installation or retrofitting it on an existing one, get the installation right to give the heat pump the best protection possible. To help keep the filter performing at peak efficiency, just like it was the day it was fitted, service it on an annual basis. Download our guides for detailed information.

  • Always follow the electrical and safety standards when installing a filter.
  • It is recommended that the filter is installed by a qualified heating engineer.
  • MagnaClean HP must be installed indoors and is not suitable for external use.
  • MagnaClean HP should ideally be fitted in-line on the return pipe. Alternative sitings can be located when the return pipe is not available.

Installation & Servicing Guide

Download

Enter your postcode to find your nearest merchant.

Find a Stockist

Get straight to the products you need in a few clicks.

Learn more about MagnaClean HP™ 

RELATED PRODUCT

Prevent biological build-up with MC10+ Biocide

With a dual biocide formulation, MC10+ tackles algae and biological contamination with ease. Extra concentrated, containing two active ingredients, it’s more effective than single biocide products when it comes to preventing the problems that arise in underfloor heating. 

View Product

THE LATEST

Heat Pumps: The Future of Heating in the UK?

As the UK government aims to reach its target of net-zero emissions by 2050, renewable energy sources are becoming more important than ever and will soon become the norm within the heating industry. But what does this mean for you? 

Read our article to find out ​  

Help & Support

Click to view our Customer Support, Savings Calculator and FAQs

Tool

Product
Selector

Get straight to the products you need in a few clicks.

Tool

Find a 
Rep

Discover who your local Business Support Manager is.

Tool

Find a
Stockist

Enter your postcode to find your nearest merchant .

Helpful Tools

ADEY’s got some handy tools to help you protect your central heating system…

Product
Selector

Get straight to the products you need in a few clicks.

Find a
Rep

Discover who your local Business Support Manager is.

Need
Spares?

You can buy spares parts direct from us on our ADEY Spares site.