MagnaClean TwinTech®
For underfloor or renewable heating systems using heat pumps, capturing magnetite is one thing but there’s other debris to deal with too. We’ve created MagnaClean TwinTech® to handle both. Its high-performance magnet takes care of magnetite, while its fine wire gauze traps non-magnetic and biological films that can build up in lower-temperature systems.

Homeowner benefits
- Engineered specifically for lower-temperature central heating systems such as underfloor heating and renewable heating systems using heat pumps
- Protection from magnetite and non-magnetic debris
- Powerful MagnaClean® magnetic capture designed to remove suspended sludge the first time it passes through the filter for immediate and ongoing protection for boilers
- Quick and easy installation can be completed in just a couple of minutes
- Secondary non-magnetic capture designed to capture other debris that might be in your heating system
- 10-year warranty if registered within 30 days of installation
Keeping heating system water clean and protected can give you...
- Up to 7% reduction in carbon emissions per home*
- Up to £90 annual saving on heating bills*
*For typical three-bedroom property based on independent research
Technical specifications
Canister and Lid
Bleed valve
- Body material: Nickel-plated brass
- Screw: Nickel-plated brass
- Retainer: Nickel-plated brass
- Ball: Stainless steel
- Spring: Stainless steel
- Outer hex: 22 mm
Seal valves
- Material: Glass-reinforced nylon
- Fluid capacity: 340ml
- Inlet diameter: 22mm at valve
- Outlet diameter: 22mm at valve
- Thread: Pressure thread
- Flow configuration: Flow must enter the bottom port and exit the top port
Magnet
- Body material: Nickel-plated brass
- Seal material: Long-life PTFE ball seals
- O ring material: EPDM 70
Valve inlet/outlet: 22 mm
Wire gauze
- Body material: Stainless steel
- Diameter: Approximately 90 mm
Servicing clearance
- Air vent (top): 50mm
- From magnet cap (bottom): 95 mm
Magnet
- Housing: Stainless steel
- Length: 150mm
- Diameter: 19mm
Installation and servicing
Maintain peak performance
Whether you’re fitting a MagnaClean TwinTech® on a brand-new heating
system or retrofitting it on an existing heating system, get the
installation right to give the boiler the best protection. And to help
keep the filter performing as powerfully as the day it was fitted,
service it properly. To do both, simply follow our guide.
Learn more about our magnetic filters
Take a look at MagnaClean Twintech
In central heating systems that have underfloor heating or renewable heating systems using heat pumps, capturing magnetite is one thing but there’s other debris to deal with too.
See how the TwinTech® captures not only magnetic debris but biological films too.

RELATED PRODUCT
Use with MC10+ Biocide
With a dual biocide formulation, MC10+ tackles algae and biological contamination with ease. Extra concentrated, containing two active ingredients, it’s more effective than single biocide products when it comes to preventing the problems that arise in underfloor heating.
View productTHE LATEST
MCXS External Leak Sealer
The NEW external leak sealer and jointing compound is your next best friend.
Learn moreMagnaClean TwinTech®
For underfloor or renewable heating systems using heat pumps, capturing
magnetite is one thing but there’s other debris to deal with too. We’ve
created MagnaClean TwinTech® to handle both. Its high-performance magnet
takes care of magnetite, while its fine wire gauze traps non-magnetic
and biological films that can build up in lower-temperature systems.
Helpful Tools
ADEY’s got some handy tools to help you protect your central heating system…

Savings Calculator
Enter your postcode to find your nearest merchant.

Water Hardness Checker
If you have any queries, feel free to contact us.

Product
Selector
Discover who your local Business Support Manager is.

Homeowner Benefits
Sample text. Click to select the text box. Click again or double click to start editing the text.
- Engineered specifically for lower-temperature central heating systems such as underfloor heating and renewable heating systems using heat pumps
- Protection from magnetite and non-magnetic debris
- Powerful MagnaClean® magnetic capture designed to remove suspended sludge the first time it passes through the filter for immediate and ongoing protection for boilers
- Quick and easy installation can be completed in just a couple of minutes
- Secondary non-magnetic capture designed to capture other debris that might be in your heating system
- 10-year warranty if registered within 30 days of installation
Keeping heating system water clean and protected can give you...
- Up to 7% reduction in carbon emissions per home*
- Up to £90 annual saving on heating bills*
*For typical three-bedroom property based on independent research
Sample text. Click to select the text box. Click again or double click to start editing the text. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Technical Specifications
Canister and Lid
Material: Glass-reinforced nylon
Fluid capacity: 340ml
Inlet diameter: 22mm at valve
Outlet diameter: 22mm at valve
Thread: Pressure thread
Flow configuration: Flow must enter the bottom port and exit the top port
Magnet
Housing: Stainless steel
Length: 150mm
Diameter: 19mm
Bleed Valve
Body material: Nickel-plated brass
Screw: Nickel-plated brass
Retainer: Nickel-plated brass
Ball: Stainless steel
Spring: Stainless steel
Outer hex: 22 mm
Seal Valves
Body material: Nickel-plated brass
Seal material: Long-life PTFE ball seals
O ring material: EPDM 70
Valve inlet/outlet: 22 mm
Wire Gauze
Body material: Stainless steel
Diameter: Approximately 90 mm
Servicing and Clearance
Air vent (top): 50mm
From magnet cap (bottom): 95 mm
Installation & Servicing Guide
Sample text. Click to select the text box. Click again or double click to start editing the text.
Maintain peak performance
Whether you’re fitting a MagnaClean TwinTech® on a brand-new heating
system or retrofitting it on an existing heating system, get the
installation right to give the boiler the best protection. And to help
keep the filter performing as powerfully as the day it was fitted,
service it properly. To do both, simply follow our guide.
Learn more about our magnetic filters
Take a look at MagnaClean Twintech
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
In central heating systems that have underfloor heating or renewable heating systems using heat pumps, capturing magnetite is one thing but there’s other debris to deal with too.
See how the TwinTech® captures not only magnetic debris but biological films too!
RELATED PRODUCT

Use with MC10+ Biocide
With a dual biocide formulation, MC10+ tackles algae and biological contamination with ease. Extra concentrated, containing two active ingredients, it’s more effective than single biocide products when it comes to preventing the problems that arise in underfloor heating.
View ProductTHE LATEST
MCXS External Leak Sealer
The NEW external leak sealer & jointing compound is your next best friend.
Learn MoreHelp & Support
Click to view our Customer Support,
Savings Calculator and FAQs


Tool
Product
Selector
Get straight to the
products you need in a
few clicks.

Tool
Find a
Rep
Discover who your local Business Support Manager is.

Tool
Find a
Stockist
Enter your postcode to find your nearest merchant .
